Our group interest is focused on 3D Printing Innovation in Multi-scale Composite Design, Manufacturing, and Applications, specific areas include:
Additive manufacturing innovations
Structural and functional fibers and composite materials
Electrochemistry applications: battery and supercapacitor
Baohui's paper about joule heating-assisted composite manufacturing has been accepted on Composites Science and Technology. Cheers!
Lab renovation is finally completed. Let's rock!
Dr. Fu received 2020 SAMPE Young Professionals Emerging Leadership Award!
The Society for the Advancement of Material and Process Engineering (SAMPE) is a global professional member society that provides enhanced educational opportunities, by delivering information on new and advanced materials and processing technology.
Our 3D printing of composite work was reported by UDaily (Link).
Yuanyuan's paper about joule heating-assisted CNT/glass welding has been accepted on ACS Applied Materials & Interfaces (Link).
We received a grant from NASA to work on 3D composite printing.
Check the news article "New 3D Printing Technology May Revolutionize The Composites Industry" (Link).
Dr. Fu is invited to join the editorial board of Nanomedicine & Nanotechnology Open Access (NNOA) (Link).
Yuanyuan's paper about LiF-Li anode composite for high current and high capacity has been accepted on Energy & Environmental Materials (Link).
Dr. Fu is invited to join the editorial board of Journal of Composites Science (Link).
Check the previews "3D Printing of Carbon Fiber Composite: The Future of Composite Industry? (Link)" written by Prof. Wai Yee Yeong at Nanyang Technological University in Singapore, commenting on our recent 3D printing carbon fiber composite work published in Matter (Link)
Call for papers!
Dr. Fu is a lead guest editor on the special issue "Structural and Functional Fibers and Composites" in Advanced Fiber Materials (a Springer Nature journal; Link).
Our co-authored work has a cover image in ACS Applied Materials & Interfaces (2020 Volume 12, Issue 21).
Dr. Fu is invited to give a presentation in Covestro-Tongji Innovation Academy Seminar of Tongji University about 3D Printing of Continuous Carbon Fiber/Thermoset Composites. Thanks for Prof. Wei Luo's invitation.
Our co-authored manuscript was accepted by the journal ACS Applied Materials & Interfaces.
Dr. Fu is invited to give a keynote speech on the topic of Garnet-type solid-state electrolyte and batteries in the upcoming International Conference on Advances in Energy Research and Applications (ICAERA’20). (Link)
Dr. Fu is invited to give a lecture on the topic of 3D Printing of Carbon Fiber Composite in the upcoming 2020 AIChE Annual Meeting. Thanks for Prof. Kenan Song's invitation.
Dr. Fu is invited to give a presentation on the topic of 3D Printed Batteries and Energy Storage Devices in the upcoming The Electrochemical Society (ECS) PRiME 2020 conference. Thanks for Prof. Yoon Hwa's invitation.
Our team is working on functional masks, and the masks are designed to potentially kill COVID-19 in a few minutes.
We used 3D printer to fabricate face shield for the local hospitals.
Our co-invented patent with the title of SOLID-STATE HYBRID ELECTROLYTES, METHODS OF MAKING SAME, AND USES THEREOF was published online (20200112050A1). (Link)
Our work on 3D printing of continuous carbon fiber/thermosetting composite was accepted by Matter. This is a collaborative work with Prof. Tsu-Wei Chou. Thank you!
Our CAM lab is proudly participating in the UD COVID 3D Printing team to help with fabrication of 3D printed face shield for local hospitals.
Delaware stay-at-home order, our lab is closed!
Our co-authored manuscript was accepted by the journal Energy Storage Materials.
CoronaVirus outbreak! Stay safe!
Our co-authored manuscript "Garnet-Type Solid-State Electrolytes: Materials, Interfaces, and Batteries" has been accepted by Chemical Reviews. (Link; Impact factor: 54)
Our co-invented patent with the title of Solid-State Li-S Batteries and Methods of Making Same was published online (US20200075960A1). (Link)
Dr. Fu gives an invited talk on the topic of "Functional and Smart Fibers" in UD Henswear symposium.
Dr. Fu is invited to give a talk on the topic of "Smart fibers and textiles" in the upcoming Techtextil North America 2020 conference in Atlanta. Thanks for Prof. Nian Liu's invitation.
Dr. Fu is a Topic Editor in Frontiers in Chemistry. (Impact factor: 3.994)
The research topic is Green Synthesis and Applications of Functional Nanomaterials, welcome to submit your manuscript to us! (Link)
CAM lab is reported on this month's UD Magazine! (link)
Dr. Fu gives a talk about "3D Tortuous Li Anode Design for High Current (30 mA/cm2) and High Capacity (30 mAh/cm2) Li Stripping/Plating" at MRS conference in Boston.
Dr. Fu received a funding from UD HensWEAR to work on wearable batteries! Thank you, HensWear!
Dr. Fu gives a talk about "Scalable 3D manufacturing of architected structures with 0D/1D/2D materials " in UD-ANL workshop.
Yuanyuan and Baohui present our work about advanced fiber and composite manufacturing techniques in 2019 ASME IMECE conference in Salt Lake City.
Dr. Fu gives a talk about "Scalable 3D manufacturing of architected materials" in The Fiber Society Conference, UT Austin.
Call for abstracts! I am chairing the Additive Manufacturing category in SAMPE 2020 in Seattle, USA.
Looking forward to seeing you in Seattle!
Dr. Fu gives an invited talk about "Additive manufacturing of continuous fiber reinforced thermoset composite" in SAMPE Baltimore/Washington Chapter meeting.
Dr. Fu gives a talk in Tsu-Wei Chou 50th Anniversary Celebration Symposium! Big congrats to Prof. Chou for his 50 years service at UD! Many thanks to Prof. Chou for his strong support in my research!
Our provisional patent about 3D printing of continuous carbon fiber/thermoset composite was filed! Cheers! We are using commercially available high-performance carbon fibers and resins to produce 3D printed composites! We believe this is a big step in advancing composites manufacturing!
High school student Prasanna Krishnamoorthy finished his summer internship in CAM lab! His project is 3D printing carbon nanostructures! Good job!
Call for abstracts! We are inviting you to contribute to the session of Fibers for High-performance Textiles and Composites in the Fiber Society's Fall 2019 Technical Meeting and Conference (link).
Looking forward to seeing you in UT Austin, USA, October 28-30, 2019!
Dr. Fu is invited to chair the session of Fibers for High-performance Textiles and Composites in 2019 Fiber Society Conference!
Our first battery paper is submitted today! Thanks for hardworking, Tiankuo!
Our first composite 3D printer was born today in our CAM lab! Breakthrough!
Dr. Fu becomes the member of American Society for Engineering Education (ASEE).
Dr. Fu gives two talks about Bio-inspired solid-state electrolyte battery and Flexible solid state electrolyte battery in American Chemical Society National Meeting in Orlando, FL.
Prasanna Krishnamoorthy from Charter School of Wilmington will join our group this summer through the 2019 UD Summer High School Engineering Internship Program. Welcome!
Tiankuo Chu joins our lab today. Welcome, Tiankuo！
Dr. Ping Zhang joins our lab today. Welcome, Ping!
Yuanyuan Shang joins our lab today. Welcome, Yuanyuan!
Dr. Fu gives a talk about flexible solid state electrolyte in Materials Research Society (MRS) conference in Boston.
Dr. Fu visits the Brookhaven National Laboratory and introduces our work on solid battery.
Our lab has a new member, Baohui Shi. Welcome, Baohui!
Dr. Fu gives a talk about smart textile in The Fiber Society's Fall 2018 Technical Meeting and Conference.
Dr. Fu is invited as the chair "Textiles and Reinforcements" section in Society for the Advancement of Material and Process Engineering (SAMPE) 2019 conference.
Dr. Fu's Composite & Additive Manufacturing Lab website has been officially online today!